GO TO WEBSITE

RALC ITALIA RMC SL

JOB CENTRE "RMC SL" - MACHINING CENTER "RMC SL"

RMC SL is CNC machining center more stable mobile gantry in its class. It is the machine that responds more effectively to the most demanding requirements of companies working extrusions. The axes, interpolating completely, allow optimal degrees of finishing and machining speeds far superior to the average.

Available with 4 or 5 axes controlled, fully automatic control, performs drilling, milling and rigid tapping. The machine is available in three standard versions according to the X-axis travel: 4.400-6.700-9.000. The work area can be managed using the full length of the machine or in two independent zones (the shuttle mode). The center RMC SL is equipped with a system for remote servicing over IP network.
RMC SL - Head HSD - stock - Special clamping operation
RMC SL - Head HSD - Special clamping operation
RMC SL - HSD Head - clamping operation standards
RMC SL - HSD Head - clamping operation standards
RMC SL - Head HSD with cutter - operated vice standards
RMC SL - Head HSD with cutter - operated vice standards
RMC SL - HSD head with the cutting blade - clamping operation standards
RMC SL - Tool store
RMC SL - CNC Control
MORSE: The number of clamps depends on the length of the machine, and the working demands. Their positioning is performed by the mobile portal, pre-set quotas by the operator program. In single zone mode flow throughout the working range in X.
The independent closing of the clamps can be operated during loading of the pieces.
ELECTRO: The 12 kW motor spindle with high torque S6 lets you perform heavy machining typical of the industrial sector. The spindle is liquid cooled. This allows the use of both steel extrusions that of aluminum profiles. The tool is lubricated with a minimal oil diffusion system, directly managed by the numeric control.
TOOL MAGAZINE: The tool magazine is integrated on the mobile portal and moves together with the electro. Not being in a fixed position the tool change is very rapid. The standard system to the exchange arm, typical of traditional machine tools, allows a drastic reduction of the time required for the tool changing operation.
STROKES OF REFERENCE: At the ends of the machine are robust and rigid lines, that enslave to bar reference. Each abutment is actuated by a pneumatic cylinder and is of retractable type. It is selected, automatically, by the machine software, depending on the processes to be performed. Optionally, provide the central characters.
CNC CONTROL: The industrial CNC is open and unrestricted. The control can be ECS (Yaskawa motors) or SIEMENS (SIEMENS motors). The operator panel is mounted on a mobile support. The user interface is a color 15 "with USB keys display for remote interfacing with PC and CN, complete with hand control. Mouse, keyboard and remote flyer are available on request.
RMC SL - 5 axis
RMC SL - clamping operation standards
RMC SL - HSD head with the cutting blade - clamping operation standards
RMC SL - Tool store
RMC SL - Probe tools
RMC SL - Siemens operator panel
ASSI
number of axes 4 or 5
Working stroke of X axis work
4.400 - 6700-9000 (mm)
Useful travel of Y-axis work 600 (mm)
Z axis stroke of work 400 (mm)
Working stroke of axis A (version 5 axes) ± 120 (°)
Working stroke of axis C (version 5 axes) ± 240 (°)
Speed ​​X-axis movement 80 (m / min)
Speed ​​Y axis shift 55 (m / min)
Speed ​​Z-axis movement 30 (m / min)
Axis rotation speed A 30 (° / sec)
C axis rotation speed 50 (° / sec)

ELECTROSPINDLE
maximum power in S6 (kW) 12
Maximum speed (rev / min) 24,000
tool taper HSK F63
Cooling liquid

TOOL MAGAZINE
Maximum number of tool magazine 12 or 20 (optional rotating magazine)
maximum cutting blade diameter butts 500 (mm)
Maximum tool length 200 (mm)

SPECIFICATIONS MACHINE
Max size machinable on 5 faces 400 x 300 x 6500 (with protruding cutter 40 mm L = 6700)
Maximum tolerance of repeatability ± 0.07 (mm)
ways of working monozona or commuter (maximum 2 pieces)
machinable material aluminum, light alloys, steel profiles with max. 5 mm

STANDARD EQUIPMENT
Jokes workpiece reference 2 or 4
Automatic shifting morse through the portal handling
collecting belt shavings oil-resistant and wear-resistant material
preset tools length measurement (measuring diameter optional)
Teleservice via internet connection

OPTIONS
morse custom group CNC SIEMENS or ECS
Chucks for rotation of the tubes hydraulic clamps
Smoke evacuation system loading systems and automatic unloading
soundproof booth Programming Software

Referred Catalogues