Marketplace

OMP TF-170-LASER
Laser tube cutting system with fiber source, capable of processing pipes up to ø170mm and derived profiles open and / or closed. Resonator fiber laser with 2 kW power Mobile spindle speed up to 120m / min Touch panel intuitive and easy to use, industrial Ethernet connection enabled Closing hydraulic spindle controlled by proportional valve Charger [...]
>
>
BLM E-FLEX
E-FLEX is the machine fold flush-head all-electric set-up by the BLM to work pieces with particularly complex shapes with 3D developments not high. A solution truly flexible that by using the attached equipment and the type of bend to be realized is able to apply various processes of curvature thanks to the two towers of which is equipped. The scope [...]
>
>
BORSATTO LINES OF CUT
These are cutting only lines, where tubes are taken from the loader, cut and offloaded, without any other process. There are two series for this type of line: with and without shavings removal. The ones without shavings removal use continuous-edge disks which cut by incision and are recommended for tubes with a maximum Ø60mm and thickness until [...]
>
>
CRIPPA TUBEFLEX
The  TUBEFLEX1 and TUBEFLEX2  CNC tube bender offer multiple, fully automatic bending cycles. They are available in 2 different set ups: - With 1 bending head and one bending sense designed to be manually transformable for either clockwise or counterclockwise bending - With 2 bending heads, with clockwise and counterclockwise bending directions [...]
>
>
HITEMA COOLING BIG EVOLUTION
BIG evolution series operating with refrigerant fluid R134A and R407C.These chillers are PED certificated TUV Italy number 0948, with air condensation and axial fans with or without “Free-cooling” section, to guarantee a high energy saving. The nominal cooling capacities are 220÷1500 kW in standard condition (EWT 12°C, LWT 7°C [...]
>
>
HPM MOD. STEEL MAX
The “Steel Max” model appears to be the perfect match between robustness and flexibility representing a valuable resource for heavy structural steel work operating in the most varied fields: from metal construction works, earth moving equipment, shipbuilding to the industry of renewable  energy. The plant can be powered by any [...]
>
>
MACO SAWS BSS 360 AR
The BSS 360 AR is a band saw with pivoting trajectory , for profiles and tubes angled cut ; controlled by NC , with a patented system of double vice and a particular rotation . •Band-head in cast iron fusion that is optimal to eliminate vibrations •Double vice ( plus the pince) tohang the bar (patented) •Mobile vice programmable [...]
>
>
MEP SAWS TIGER 402 CNC HR 4.0 RC
TIGER 402 CNC HR 4.0 RC, non-ferrous circular saw with TCT blade for aluminium and alloys, with programmable head mitering trough MEP CNC 40 controller. – Automatic vertical circular saw powered by brushless motor mitering from -45° to +45° (see picture A) and up to +60° in semiautomatic mode. This machine can be equipped with the [...]
>
>
MG M LINE
Our new line of 4-roll plate bending machines offer many decisive advantages. The four roll  M line  is the easiest to operate plate bending machine, thanks to its ability to pinch the plate between the 2 central driven rolls, prebend the leading edge, and rolling the body of the part along with the trailing edge all in one direction and in [...]
>
>
RALC ITALIA CUTTING LINE GEMINI 802
Cutting line Gemini 802 Line of new conception characterized by the possibility of simultaneous cutting of two bars or mono bar. The particularly robust design, the components used and the solutions adopted make it a high production machine. Automatic management of the following cutting parameters controlled through operator panel: • automatic [...]
>
>
Contacts
info@trade4industry.com


Copyright@Trade4Industry2015