MEP SAWS SHARK 282 CCS/MA

SHARK 282 CCS (Cut Control System) manual bandsawing machine to cut from -45° up to +60°. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight controlled by a hydraulic brake: after the cut, the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/closed by a manually-controlled valve (optional with pedal control).
- Hydraulic transducer to visualize band tensioning.
- Wire chip brush for band cleaning.
- Double head return spring.
- Sliding vice with sideways movement and fast-positioning system.
- Wide working surface with rotating table installed on a roller bearing, dia. 265 mm, pre-loaded with thrust bearing.
- Adjustable precision stops for cuts at 0°, 45°, 60° left and 45° right.
- Steel base with removable coolant tray.
- Electric pump for band lubrication and cooling.
- Machine arranged for handling with movement equipment.
- Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
- Stock support arm with roller predisposed to mount loading table.
- Bi-metal band for solids and sections.
- Service keys and instructions manual for maintenance and spare parts list.
- The CUT CONTROL SYSTEM (CCS) can be retrofitted on machines out in the field.